[tbranca]

Hi can anyone tell me does the zx636 shock fit to the z1000 linkage or do i need the zx636 linkage as well...........thanks

I'm using a 636 shock with z1000 linkage. The bke will sit up higher get the lowering links Im using Muzzy 636 lowering links. You will be blown away on how crappy the factory shocks are.

 

[Vinhtvu2]

No, those calipers wont work on the ZX-6R forks....... they're not radial mount...

 

[richard33043]

flywheel,rotor and cover

flywheel rotor and cover off zx9r years are only 2000-2003., earlier zx9r flywheel assemblies wont work? such as 1996 to be specific??

 

[ballsdeepracing]

will zx10r suspension work with the 03-06 z?

 

[Compstall]

I'm not sure about the forks, but I have a rear shock off one.

 

[crowbar]

Fork tubes are too big if I remember correct.

 

[Azweepay]

Right, I think it's been done but they had to use the 10's triple clamps, or at least the lower. Or maybe even have the holes in the Z's triples bored out.

 

[dynagrego]

You have to press z1000 stem into ZX10 2006-07 lower triple.It is a sticky thread.
http://www.riderforums.com/showthread.php?t=41243
ZX10 2004-2007 forks are okay.
ZX10 2008 forks are too long.:mecry:

 

[ballsdeepracing]

sweet thanks all

 

[Compstall]

I think it's time to update the list...

 

[Andy_k]

ZX-9

- Flywheel / Stator / Cover ('98-'03)
Mods Required: Requires lengthening the wires by about 5-6 inches.

Can anyone clarify this for me. Will the parts from any year 98 to 03 zx9r fit an 03 z1000? Or do I need to source 2000 - 2002 parts?

 

[Zavochkin]

I think it's time to update the list...

Agreed.

I'm trying to figure out what ZX10 parts (by year) fit the 03-06 Z1 without the need of any modifications. Would help if the list was updated.

 

[Compstall]

I'm TDY right now, but I'll try and pick out the updated info once I get back.

 

[Zavochkin]

I'm TDY right now, but I'll try and pick out the updated info once I get back.

Sounds good, I appreciate it.

 

[Coone]

Calipers
- 2001-2003 GSXR 600/750 calipers
Mods Required: May require "creative brake line routing"

Hi guys,

I want to put these calipers on my 2006 Z750. Is this possible without any mods? Going to put on steel braking lines to.

Thanks in advance,

Coone

PS: If possible post a pic

 

[dandadda]

WHere's the update??

 

[MaxWedge]

Bump Bump
Hey guys, great forum. I'm new here, came over from KawiForums. I have an oddball Q about stock header swaps. I have an '08 Z1000 and want to go 4-1 with the exhaust. Will a Zx9r or any gen Z750 header bolt up right to the Second Gen cylinder head I have? I don't have anything to compare side by side, But there are nice clean Z750 (1st gen, nothing to gut out) headpipes on ebay all the time for cheap.

Originally Posted by rocketkid781:
Let me save you some time. First off, your one can will definitely handle the "extra" exhaust. They don't make them that much different for single-sided exhausts, trust me. Secondly, don't bother with the ZX9 header-it will NOT work with the block on the GenIII (what you have) Z1000's. Though the displacement is the same at 953cc's, the configuration is different.

In the post above I'm confused when he says the Gen 3 has the same displacement. 1st and 2nd do, but 3rd is larger. Don't know if he's talking about the new Z or my ('07-'09) 2nd gen. Someone please clarify for me because I REALY don't want to spend a $grand on a new full Akra or Muzzy system.
Thank you.

 

[Azweepay]

I think that was a typo, think he meant Gen2 instead of Gen3. I couldn't find that post, but when was it? Possibly before the Gen3 even came out.

 

[MaxWedge]

it was on pg 5 of this thread. It was actually a quote from another forum, that someone quoted on here, and I quoted from that.:2far: Sorry, haven't gotten the hang of "including a quote" yet the correct way. Yeah so as I said I'm trying to find out if 1st and 2nd gen head pipes are interchangeable, and also 1000/750 pipes. From pictures I can see the casting differences between the sides of these heads, but no idea about the actual exhaust ports (spacing, size, bolt holes). Over at www.indysuperbikes.com they list two different Muzzy full exhausts for the Z1000, and say they fit '03-08 models. Akra breaks em up into 03-06 and 07-09, like I'm used to seeing. I sent e-mails to both Indy and Muzzy and hopefully will hear back tomorrow. Muzzy's site, by the way, doesn't currently have said exhaust listed (full stainless w/aluminum round muffler - with mounting tab welded on). Maybe it's been discontinued? They just show one for 07-09 (titanium??) and for the new '10 model. I'll find out more this week, just wanted to see if you guys know anything.:ithank:

 

[Zavochkin]

In the post above I'm confused when he says the Gen 3 has the same displacement. 1st and 2nd do, but 3rd is larger. Don't know if he's talking about the new Z or my ('07-'09) 2nd gen. Someone please clarify for me because I REALY don't want to spend a $grand on a new full Akra or Muzzy system.
Thank you.

Maybe he was counting the original Z1000 from 1972 as gen 1. I was a bit confused when I came onto this forum at first to learn that my bike was being referred as a Gen 1, when technically Gen 1 was 30 years before it.