RiderForums.com - Kawasaki Motorcycle Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1
Hi to all.
I am from Greece and this is my first post in this forum.
I have a Z750 and i want to change the rear sprocket for more acceleration.
The stock rear sprocket is 43 teeth.I want to put a sprocket that has 46 teeth but i can't find any.
I was looking also for a 14 teeth front sprocket but i couldn't find anything either.
So i am thinking of putting a 45 teeth aluminium sprocket made by Renthal.
Will this sprocket work normally or am i going to have any problems?

I'm thinking about problems because every 3 turns of the front sprocket and every 1 of the rear,will pass from the same place. 45/15=3

Do you know if Zx636R or Zx10R have a rear sprocket with 46 teeth and matching Z750?

Sorry for my bad English and thanks for your answers.
 

·
Registered
Joined
·
493 Posts
i have renthal sprockets +1 tooth at the rear and -1 at front lots more acceleration -throttle wheely in 2nd :agree:
 

·
Super Moderator
Joined
·
2,398 Posts
1 - 7 of 7 Posts
Top