RiderForums.com - Kawasaki Motorcycle Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
642 Posts
I've had a few RAM mounts, none just like what you are looking at, but I've had zero problems with any of them.
 

·
Registered
Joined
·
1,056 Posts
Wont the bars get in the way? For my street i used a ram mount thats attached onto the bars, for my daytona i have that same stem. It does not work well as is, you need to throw everything away but the actual ram mount. Go to lowes and get a threaded rod, some washers and a wing nut. You put the rod through the stem and ram mount and use the washers and wing nuts to secure it from the bottom and top. Otherwise it keeps coming loose with the stupid rubber expansion thing.
 

·
Registered
Joined
·
66 Posts
Discussion Starter · #4 ·
Most likely yes it will but the mount is offset a bit. I'm going to remove the bars and hope that makes it viable.
 

·
Registered
Joined
·
66 Posts
Discussion Starter · #5 ·
Wont the bars get in the way? For my street i used a ram mount thats attached onto the bars, for my daytona i have that same stem. It does not work well as is, you need to throw everything away but the actual ram mount. Go to lowes and get a threaded rod, some washers and a wing nut. You put the rod through the stem and ram mount and use the washers and wing nuts to secure it from the bottom and top. Otherwise it keeps coming loose with the stupid rubber expansion thing.
Ok, After taking a good look theres no way in hell it will fit.
:(
 

·
Registered
Joined
·
1,326 Posts
1 - 7 of 7 Posts
Top