RiderForums.com - Kawasaki Motorcycle Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
2,426 Posts
Josh,

The entire headlight assembly is a sealed plastic unit. You can't remove the front clear lens from the back reflector.
 

·
Registered
Joined
·
2,426 Posts
Josh,

And be careful about replacing the stock halogen bulb with a brighter one, there are reports on the Forum of riders who installed high intensity bulbs and the excess heat caused the lamp housing to start melting...

Many years ago, Berto decided to tackle this issue by installing a supplementary light in his fairing. This too was cause for concern since the alternator on our ZR7 is not very strong. If you add too much electrical load, the battery won't charge...
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top