RiderForums.com - Kawasaki Motorcycle Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hello All,


I'd like to know who has Replaced their front rotors on the C-14 Connie.

Currently I have 53,000 miles on the stock rotors and they are kinda grooved but she still stops fine.
Given the fact that OEM's are $400 each I'd like to find a proven brand for less money.
Anyone who's done the swap please give your input.

Thanks in Advance.

Greenmax:
 

· Registered
Joined
·
8,826 Posts
Ive bought several sets from crashed zx10's on ebay.

Going rate 100-150.00 for a nice set. 200.00 will buy almost new...like these 2400 miles on them.

2015 zx10r Rotors | eBay

2008-2015 will be the same dimensions as our stock c 14 rotors.

I have a set of Galfer 310mm rotors that would bolt right on. Also an ebay, used purchase. The rotors are in perfect condition with no damage

I much prefer the feel of the oem rotors to the galfers. If you bought the used zx10 ones, listed above, no reason to believe you wont get 50,000 miles from them, like your stock parts.
 

· Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
Thanks!

I never thought of Used ZX10R rotors or Ebay because I'm skeptical of buying used.
however the price vs. new is definitely a good point to consider, esp. if they are true or acceptable run out.

Ebay sounds good.

Ride On!

Greenmax

2014 N1k, 2010 Concours
 

· Registered
Joined
·
8,826 Posts
If you do a decent bit of searching, those bikes get crashed often, and there is always low mile ones to be found.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top