RiderForums.com - Kawasaki Motorcycle Forum banner

Pipes

2191 Views 11 Replies 7 Participants Last post by  rbthntr64
What do yous think about a pipe that comes over the top of the gen cover instead of below it? (idea in yellow) This would get the pipe out of harms way, and not restrict cornering in RH turns.
1 - 12 of 12 Posts
Kind of a cross between this;
See less See more
And this;
I am hoping to try and get Drew to make a hybrid of these up to try out.

See less See more
probably look good.. but would that make it a pain to get to the oil cap?
I think its going to put a lot of heat on your leg, unless you are going with heat shields. Other than that it would be nice to hear the scraping anymore. My muzzy doesnt scrape as bad as either of the s4's did for me but still touches down on occassion.
I had these. Didn't like em very much. They look and sound great but no heat shields. Don't want to burn my leg. Right side cover removal is a pain. Can't access idle knob when pipes are hot...same thing with the oil cap...
See less See more
The Jig is up. Spoke to Drew this morning and Fuggin Pipes is no more. He has closed the doors and has no plans to make motorcycle exhaust any more. Very disappointing.
The Jig is up. Spoke to Drew this morning and Fuggin Pipes is no more. He has closed the doors and has no plans to make motorcycle exhaust any more. Very disappointing.
Then he should sell me the grey/red M/S cuz that's a pretty sweet ride.
I know someone here said to me, get the HK because Fuggin is in trouble.
Sound advise! Thanks.
Some encouraging news. I have an e-mail into Stainlesscreations.net
to see what they can do. I can live with gold pipes over blue ones.
It will most likely be a winter project due to family illness.
Here is the Chaos III from Stainless Creations on a Yamaha Road Star

See less See more
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top