RiderForums.com - Kawasaki Motorcycle Forum banner
1 - 1 of 1 Posts

· Registered
120 Posts
LED lights...

ALL led lights, require a series resistor, wired to limit current through them... yes, you are over powering them...for a single, small LED... put a 1000 ohm 1/8 watt resistor in series with your power wire, to the LED, or you WILL blow it.

Good luck :D
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.