RiderForums.com - Kawasaki Motorcycle Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
209 Posts
Discussion Starter #1
Guys I'm trying to piece together a two brothers exhaust for my 06 z750s, I've got a c4 pipe and bought a cheap mid pipe for on 08 (was told it would work) but as you can see its too low.
I can't find a 06 mid pipe that's affordable right now (all $80 or higher) and I'm worried won't work.
Any suggestions?
122284
 

·
Registered
Joined
·
198 Posts
If you have a muffler shop near you that has a pipe bender, mandrel bender actually (pulls a series of steel balls though the pipe as it's bent to prevent a restriction on the inside of the bend) that mid pipe could be modified in a couple minutes, just needs the last bend to be a little tighter. I may need to do the same with the mid pipe on the 03>06 Z1000 full Arrow system I bought, when the weather warms up a bit so I can do mine. No real hurry for me we still have a bit of winter left up here, going to have to test fit mine so I can get it bent if need be before I put in the O2 sensor bung for auto tune module
 
1 - 2 of 2 Posts
Top