RiderForums.com - Kawasaki Motorcycle Forum banner

cut down a windsheild

1489 Views 2 Replies 3 Participants Last post by  RSC
I have a rifle superbike fairing that makes alot of wind noise. Anyone know how to cut the sheild without cracking it?
1 - 1 of 3 Posts
Shaping your Shield

I used a Dremel cut-off wheel (Fiberglass Type) to cut and mold my screen. The screen melted slightly but the melted area can easily be broken off once it cools. I cleaned up the cut (carved) area with the drum sander attachment for the Dremel. Be advised once you start shaping your shield, you'll find your self taking more and more off......;)
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.