Hi everybody, here I am again with a question about the forks oil seals... Do you know if is possible to put another Kawasaki model's seals, or even another marks? I've been using the Honda ones, but I don't know if they are ok, it was very difficult to get in. Even I'd tried with Yamaha r1 seals and were worst. :doh:doh
Anyway, do you have suggestions about it?
And sorry for my poor english, greetings from Mexico City!
You can go to the All Balls website and send them an e-mail directly asking them the specs: 56-133-1 All Balls Racing
Or, you can go to this site All Balls Fork and Dust Seal Kit 56-133-1 and put in your bike information and see what it gives you as the specs. This is what it gives for my '02 for the part number we have been discussing:
I've been using the Honda ones, but I don't know if they are ok, it was very difficult to get in. Even I'd tried with Yamaha r1 seals and were worst. [/B]
You should give All Balls a try. Their product is much better than OEM. The OEM seals have one "ridge" that makes contact with the fork cylinder. All Balls has multiple ridges. Testing shows that the All Balls seal should last 2 - 3 times longer than the OEM seal.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
RiderForums.com - Kawasaki Motorcycle Forum
1M posts
50.6K members
Since 2001
Rider forum is a community for motorcyclists including both street and track riders. Come in and talk about your favorite model.