RiderForums.com - Kawasaki Motorcycle Forum banner

er6n

  1. exhaust system for er6n

    Daily Ride
    First of all, I'm sorry about my English, because it's not my first language. I have an er6n from 2012 (latest version), I am thinking of changing the exhaust system and I have several questions I would like to resolve: 1- to change the exhaust in my version, do I have to change the whole...
  2. Question: 650r Fairings on an ER6N?

    General Ninja 650R
    Heyo! I've got an '09 ER6n and have been going back and forth on whether to get a little windscreen for it or to see if Ninja 650r(EX650/ER6f) fairings would fit on it. I'm assuming the frame and engine placement is the same on both bikes(within the same model year), but just to be sure is it...
  3. CORBIN 2009-2011 NINJA 650R 650 ER-6N ER6N SEAT SADDLE GUNFIGHTER LADY KAWASAKI

    General For Sale / Trade
    New, it costs $453.00 + shipping and maybe tax, and takes 4-6 weeks to ship. This seat has never been left outside in the sun, snow or rain, nor ridden in bad weather. Selling for $349 OBO with free shipping to the lower 48 states. This seat makes the Kawasaki ride-able. The stock seat is...
  4. laggy pickup problems?

    Ninja 650R Maintenance
    Hello guys i have an er6n which i bought 5 months back..it has run 6000kms as of now ...lately i have experienced a lag in opening of throttle and the development of torque , a lag which wasnt there before , that is to say when i open throttle a bit fast the rpm shoots then comes down a...
  5. Fender eliminator kit (Tail tidy) for Kawasaki Ninja 650R, ER6f, ER6n 2009-2011

    Ninja 650R For Sale/Trade
    Custom design Fender eliminator kit (aka Tail tidy) for 2009 - 2011 Kawasaki Ninja 650R, ER6f, ER6n. Made from 1/8 thick aluminum sheet (5052-H32), laser cut and CNC bent. Powder coated in matte black. Proudly designed and manufactured in Canada. This fender eliminator kit reuses ALL STOCK...
  6. two brothers exhaust

    Ninja 650R Maintenance
    Hi, I recently purchased a two brothers exhaust slip on for my 2010 er6n. My stock exhaust has a c0 sensor but my tb exhaust doesn't have a c0 sensor port, will I need to get one welded on or is there any other options I can take that will not cook my engine? Thanks.
  7. For Sale: 2009 Kawasaki Ninja ER-6n ~3332 miles~

    General For Sale / Trade
    This 2009 Kawasaki Ninja ER-6n / 650 is in absolute MINT condition. ONLY 3,332 MILES. Clean title. (location: Georgia, USA) Garage kept. Engine was properly broken in. Engine, clutch, and gearbox are mechanically sound with no problems. Front tire is over 50% life left. Rear tire only has...
  8. 09-11 er6n r&g frame sliders

    General For Sale / Trade
    Hey guys new to the forums but have a set of r&g frame sliders for sale/trade. They were given to me when I bought my bike but are basically new not even installed fully. I have a California model for some reason in ny so the sliders won't work due to the emissions box and I don't wanna do any...
  9. E-6n Fairing

    Sportbike Spot
    Hi guys, I'm a new rider in my first season and sadly dropped my 09 Er6n on a sand covered turn. The front right fairing is trashed and i was wondering if anyone knew where I could order a replacement for it. I've done a little research and so far can only find a full set from Hong Kong on Ebay...
  10. 2009 er-6n for sale in Pittsburgh $4000

    Ninja 650R For Sale/Trade
    Excellent condition. Adult owned & completely stock. Only 2100 miles. $4000 obo.
  11. need some 09-11 parts

    Ninja 650R For Sale/Trade
    i just picked up an 09 650r that had been dropped on the left side, smashing up some parts. i'm going to replace some stuff here and there, but have been having a hard time finding the parts used. what i'm looking for - -upper left hand cowl, in red or black if possible, but would probably take...
Top