Anyone use or have the cobra power pro. 2-1 pipe?
There is one on eBay for $150 but is a little rough. It needs new shields. I may bite on this.
This is a discussion on cobra power pro 2 into 1 within the Mean Streak Performance Upgrades forums, part of the Kawasaki Mean Streak category; Anyone use or have the cobra power pro. 2-1 pipe? There is one on eBay for $150 but is a little rough. It needs new ...
Anyone use or have the cobra power pro. 2-1 pipe?
There is one on eBay for $150 but is a little rough. It needs new shields. I may bite on this.
04 vz1600
1500 rods (.100 longer than 1600 ), cut 1500 pistons
ported heads
weight matched pistons and rods
10.8 CR
cobra power pro 2 into 1
power commander
block off plates
kuryakyn grips, mirrors
jardine forward controls
Jardine mini floor boards
lowered front fender/ cut rear fender
side plate mount
vtx shocks
spike air intake
avon storm 120 front avon cobra 200 rear
8 deg low and mean trees
Welcome to the largest Kawasaki Motorcycle Forum on the web.
Registers users do not see these ads, register today - it's free!
If you grab this, let me know how the engine performance is. I'm interested in a 2-into-1 and I've wondered about the Cobra's but hesitated because of many comments about Cobra being all about looks and wishy-washy on true performance. That said, the Cobra Power Pro is remarkably similar to the V&H Pro Pipe, and we know the V&H Pro Pipe IS a good performer.
Phil - Southern Ontario, Canada
2003 Mean Streak
Muzzy 2 into 1
Chuckster Air Intake
PC III
47,000 km
04 vz1600
1500 rods (.100 longer than 1600 ), cut 1500 pistons
ported heads
weight matched pistons and rods
10.8 CR
cobra power pro 2 into 1
power commander
block off plates
kuryakyn grips, mirrors
jardine forward controls
Jardine mini floor boards
lowered front fender/ cut rear fender
side plate mount
vtx shocks
spike air intake
avon storm 120 front avon cobra 200 rear
8 deg low and mean trees
04 vz1600
1500 rods (.100 longer than 1600 ), cut 1500 pistons
ported heads
weight matched pistons and rods
10.8 CR
cobra power pro 2 into 1
power commander
block off plates
kuryakyn grips, mirrors
jardine forward controls
Jardine mini floor boards
lowered front fender/ cut rear fender
side plate mount
vtx shocks
spike air intake
avon storm 120 front avon cobra 200 rear
8 deg low and mean trees
just found this. COBRA POWERPRO HP 2 INTO 1 WITH BILLET TIP EXHAUST - COBRA EXHAUST - 08-0266 Will the pipe that is for the vn1600a fit. I am thinking it should. Any have any input. i can get it for $305
04 vz1600
1500 rods (.100 longer than 1600 ), cut 1500 pistons
ported heads
weight matched pistons and rods
10.8 CR
cobra power pro 2 into 1
power commander
block off plates
kuryakyn grips, mirrors
jardine forward controls
Jardine mini floor boards
lowered front fender/ cut rear fender
side plate mount
vtx shocks
spike air intake
avon storm 120 front avon cobra 200 rear
8 deg low and mean trees
Phil - Southern Ontario, Canada
2003 Mean Streak
Muzzy 2 into 1
Chuckster Air Intake
PC III
47,000 km
Previous pipes were stock. Love the sound over stock. the Cobra's in the link above are the newer versions of the 2 into 1 pipes. I kinda like the way they look over mine.
I didn't notice to much of an improvement of performance. I haven't done my intake yet, currently in progress. I would expect to see some improvement after that.
IMAG0202.jpg
![]()
2004 Mean Streak
Cobra Power Pro 2 into 1
Cobra Fi2000R
Kewl Risers
Mustang Touring Seat
Custom World Luggage Rack and Backrest
04 vz1600
1500 rods (.100 longer than 1600 ), cut 1500 pistons
ported heads
weight matched pistons and rods
10.8 CR
cobra power pro 2 into 1
power commander
block off plates
kuryakyn grips, mirrors
jardine forward controls
Jardine mini floor boards
lowered front fender/ cut rear fender
side plate mount
vtx shocks
spike air intake
avon storm 120 front avon cobra 200 rear
8 deg low and mean trees
Not bad for the price. You're using Samson's now?
![]()
2004 Mean Streak
Cobra Power Pro 2 into 1
Cobra Fi2000R
Kewl Risers
Mustang Touring Seat
Custom World Luggage Rack and Backrest
Last edited by speedracer; 06-17-12 at 09:15 PM.
04 vz1600
1500 rods (.100 longer than 1600 ), cut 1500 pistons
ported heads
weight matched pistons and rods
10.8 CR
cobra power pro 2 into 1
power commander
block off plates
kuryakyn grips, mirrors
jardine forward controls
Jardine mini floor boards
lowered front fender/ cut rear fender
side plate mount
vtx shocks
spike air intake
avon storm 120 front avon cobra 200 rear
8 deg low and mean trees
Well i had an order in to Moto Leather For the Cobra powerpro 2 into 1 with billet end cap. They had it on the wed site for $304. Well i paid for it through paypal. Got a call from them today saying they can not sell it at that cost, they had made an error on the web site. Nice upstanding company they have there. I thought maybe they were blowing them out for some reason, Cobra does not show that pipe on there web site so i thought that was it. Anyway be aware of purchasing from these guys, i know i will not buy from them again.
04 vz1600
1500 rods (.100 longer than 1600 ), cut 1500 pistons
ported heads
weight matched pistons and rods
10.8 CR
cobra power pro 2 into 1
power commander
block off plates
kuryakyn grips, mirrors
jardine forward controls
Jardine mini floor boards
lowered front fender/ cut rear fender
side plate mount
vtx shocks
spike air intake
avon storm 120 front avon cobra 200 rear
8 deg low and mean trees
That's a **** off ! That would have been a hell of a buy. Sorry it didn't work out.
So what's the plan now ?
Phil - Southern Ontario, Canada
2003 Mean Streak
Muzzy 2 into 1
Chuckster Air Intake
PC III
47,000 km
That sux. Another place to scratch off the list. The newer Cobra 2 into1 are going for $459 on Ebay. A bit pricey...
![]()
2004 Mean Streak
Cobra Power Pro 2 into 1
Cobra Fi2000R
Kewl Risers
Mustang Touring Seat
Custom World Luggage Rack and Backrest
yep, to pricey for me. I saw the price and could not pass it up. I guess it was not to be. I love the pipes i have now anyway but sometimes just like to change things up a little. I guess now i will get me a new helmet. Seems i find one i like better every year. I think i will get the exo 250 from scorpion. I have the exo 100 now but my helmet speakers don't sound that great in it.
04 vz1600
1500 rods (.100 longer than 1600 ), cut 1500 pistons
ported heads
weight matched pistons and rods
10.8 CR
cobra power pro 2 into 1
power commander
block off plates
kuryakyn grips, mirrors
jardine forward controls
Jardine mini floor boards
lowered front fender/ cut rear fender
side plate mount
vtx shocks
spike air intake
avon storm 120 front avon cobra 200 rear
8 deg low and mean trees