I was wondering if anyone wanted to chime in with where they have their powerlet's mounted. I wanted to do the dash panel like some have but I think my powerplug for my Garmin is going to be too bulky, long and get in the way of the fork tubes from lock to lock. I could of sworn I saw someone who had a powerlet mounted off the backside of the headlight switch housing but I can't find the pic to save my life. Just wondering what other clean install locations others have used. Feel free to post your pics and setup!

Subscribe
Im looking to add 12v and GPS and/or Camera

Mine is plugged into my tender harness under the rear seat. I then run my power cord between the fairing and tank and beside the seat and it's invisible when hooked up. When I run my bags, my tender harness reaches my bags and I can plug anything in inside the saddlebag. I do have to zip tie my socket in when it's under the seat as it vibrates loose under there sometimes.

Originally Posted by haknslash

I was wondering if anyone wanted to chime in with where they have their powerlet's mounted. I wanted to do the dash panel like some have but I think my powerplug for my Garmin is going to be too bulky, long and get in the way of the fork tubes from lock to lock. I could of sworn I saw someone who had a powerlet mounted off the backside of the headlight switch housing but I can't find the pic to save my life. Just wondering what other clean install locations others have used. Feel free to post your pics and setup!

i had the same concern - but, my Garmin on the clutch mount (using ram mounting system) has the 36" cord from the left dash powerlet and it does not interfere at all. I'll post better pics.