RiderForums.com - Kawasaki Motorcycle Forum banner

N1K Motorwerk's Footpeg lowering blocks issue

4K views 16 replies 9 participants last post by  st kurt 
#1 ·
Hi Everybody: Got a 2012 N1K that is stock a week ago. Last night I added Motowerk's footpeg lowering blocks that lower the footpegs 1.3 inches. I was surprised to notice that, although the position is much more comfortable, it steers MUCH slower. Have any of you had this experience with this product? I used them on my Ninja 650 and Versys with no ill effects. The only thing that makes sense is that less weight is one the bars since the weight distribution has changed. On my other bikes I added lowering links which included raising the fork tubes. I have read that some current N1K owners are raising the fork tubes 5mm to quicken the steering. I think I will give that a try O/W they are coming off! Any thoughts would be appreciated. Thanks
Steve
Denver
 
#2 ·
Foot peg position shouldn't make any difference to steering geometry. And unless it significantly changes your body position (and the bike's center of grav.) I can't see how it would change the turn-in "feel". Maybe I don't understand your definition of slow steering, but are you sure you're countersteering properly?

I think the best demonstration of (lack of) impact of body position on steering is Keith Code's No B.S. bike
 
#4 · (Edited)
I love trying to explain countersteer to some of my squidly rider friends. It's like trying to explain how a black hole works. "What do you mean, you push the right handle bar up to turn right. That doesn't make any sense!" Is the reply I get a lot, so frustrating.
 
#11 ·
I had a long running argument with a physics professor in college about how motorcycles actually steered. He didn't ride and had no knowledge or understanding of countersteering. But he was convinced he understood the issues.

He was wrong and finally accepted that. The fastest way to trip up a physicist is to start talking vehicle dynamics. :D
 
#6 ·
Didn't make sense to me.. I don't see how your foot position would affect you pushing forward on either handlebar grip to initiate a turn..

______
Tapatalk 2, yo!
 
#10 ·
Not to be a flaming pedant, but one cannot ride a motorcycle without countersteering. Sure, the feel may have changed a bit with your new body position, but the mechanics of making a single-track vehicle turn haven't changed.

Edit: I see that this was covered nicely above. Note to self: stop skimming threads. :D
 
#12 ·
steve, how tall are you and how much more leg room to you have with the lowering blocks. Have you had any issues with grinding the pegs now that they are lower?
 
#13 ·
Motowerk has a collet for the rear brake that allows you to lower more than the factory stamped steel piece. Its billet aluminum looks great and works fantastic. Its also made in the usa :) huge plus. Lets you get that brake pedel down more to where you can use it comfortably. Cheap,Looks Great, Get one you wont be sorry.
 
#14 ·
Hi Steve,
I just posted a response to your question on another thread. Sorry for any contradictions in earlier posts.

If your weight has shifted further back, you will have effectively raised the front end of your bike (and therefore the amount of trail).

To a smaller extent, you may have also lost;
1. a bit of leverage on the bars than before
2. a little less feel for the front wheel......

Dropping the front end should resolve your issue. By loading up the front (and unloading the rear), the more the forks will be compressed, and therefore the lower your front ride height (decreasing your trail).

Your post tells me your a sensitive to small changes, therefore I recommend changes as small as ~2mm and testing. This will also help you understand the subtleties of each change, in terms of feel.

Good luck.
 
#16 ·
Thanks everybody for your thoughtful posts. I am 5' 7" and 160 lbs with gear. And, a 32" inseam with boots. My bike is new and I haven't broke it in yet so I can't comment on agressive cornering but there is definitely more leg room. I have the collet but haven't installed it yet. It appears that you have to take part of the front fairing off to raise the fork tubes. Is that correct? WHAT i did notice is that my Motowerk spools hit the muffler. I took them off last night and will go for a spin today to see if things changed. My left muffler has a small dent from the spool. Any suggestions for suspension settings for someone my size? Finally, thanks to all you vets for your service!!
 
#17 ·
It appears that you have to take part of the front fairing off to raise the fork tubes. Is that correct?
I was able to raise my forks without having to touch the fairings. Give it a shot, it's up to you.

Any suggestions for suspension settings for someone my size?
Don't worry about this for now. Spend more time in the saddle, get to know your bike and how you like to ride it. Once you have a better idea of what you want from it, then you can start chasing settings.

There are too many variables when it comes to suspension settings, aside from the weight/size of the rider etc., how you ride is the main consideration of what you want your suspension to do.

Don't worry too much about fine tuning just yet. Get out on the road and enjoy your bike.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top